Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- hardware:controllers:fluksousb [2011/05/16 10:10] – Issues and Questions added justinotherguy
+++ hardware:controllers:fluksousb [2011/05/29 22:57] (aktuell) – fluksoUSB-Link nun nicht mehr auf die Aufbauseite sondern auf die übergeordnete Seite (die ua auf die Aufbauseite verlinkt) justinotherguy
@@ Zeile 1: / Zeile 1: @@
-This page is supposed to help getting [[http://developer.mysmartgrid.de/doku.php?id=fluksousbboard|fluksoUSB]] to work.
+====== FluksoUSB  ======
+{{ :hardware:controllers:flukso_usb.jpg?200|Flukso USB}}
-There are bits and pieces for most of it floating around the net - alas it doesn't seem to work properly yet.
+FluksoUSB ist eine kleine Adapterplatine zum Auslesen von S0-Zählern und Stromwandlern, die per USB an einen Rechner angeschlossen wird.
-=== What is fluksoUSB? ===
+FluskoUSB wurde vom [[http://developer.mysmartgrid.de|mySmartGrid Team]] entwickelt und ist auch dort **[[http://developer.mysmartgrid.de/doku.php?id=fluksousb|dokumentiert]]**.
-To answer this you should first of all give [[http://flukso.net/|Flukso]] itself a look. Flukso is an open source web-based community metering application. It basically consists of two devices combined into one:
-  * an ATmega based measuring PCB that you can hook up transducers to
-  * an Atheros based OpenWRT system
-The two of them are linked via UART (for Flukso v1 - it's SPI for Flukso v2 which is going to be available any time soon).
-fluksoUSB ist the ATmega part of Flukso
+Zur Anbindung an die volkszaehler.org Middleware wird das [[software:controller:vzlogger|vzlogger]] Kommandozeilen Tool benutzt.
-=== Hardware ===
-There is a [[http://developer.mysmartgrid.de/doku.php?id=fluksousbboard|brilliant description]] on how to get the hardware to work
-=== Software ===
-  * You can find software for it [[https://github.com/comsound/flukso/|in comsound's github repo]]. It doesn't give readings below some 1.000 Watts though - still some funny bug in it.
-  * domke seems to have put together [[https://github.com/domke/optoreader|something]], too.
-=== Issues ===
-  * Using [[https://github.com/comsound/flukso/|comsound's github repo]] fluksoUSB only gives "0 Watts" below a load of some 1.000 Watts
-=== Questions ===
-  * What stops us from using [[https://github.com/icarus75/flukso/tree/develop/mote/v2|the new flukso code]]?
-  * Why does fluksoUSB only show reasonable values when more than 1.000 Watts are connected?