Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- software:controller:vzlogger:installation_c-version [2013/05/01 09:47] – [Binaries] removed deprecated info justinotherguy
+++ software:controller:vzlogger:installation_c-version [2014/12/31 18:47] (aktuell) – removed c reference andig
@@ Zeile 1: / Zeile 1: @@
-===== vzlogger C-version Installation =====
-==== Build from Source ====
-=== Prerequisites for compiling vzlogger ===
-Please note that a full configured vzlogger requires these libraries to compile successfully:
-  * pkg-config
-  * libjson >= 0.9
-  * libcurl3 >= 7.19
-  * libsml >= 0.1
-  * libmicrohttpd >= 0.4.6
-You can relax these dependecies by disabling certain features:
-<code>./configure --disable-{sml,local}</code>
-On Debian based distros most of these dependencies can easily installed with:
-<code>apt-get install pkg-config libcurl3-dev libjson0-dev libmicrohttpd-dev</code>
-building libsml additionally requires the development headers for libuuid:
-<code>apt-get install uuid-dev</code>
-=== building libsml ===
-<code>
-git clone https://github.com/dailab/libsml.git
-cd libsml
-make
-</code>
-note that libsml does not include a 'make install' target.
-you might manually install it into your system, or just use the instructions below to compile vzlogger.
-=== building vzlogger ===
-<code>
-git clone -b c-version https://github.com/volkszaehler/vzlogger.git
-</code>
-<note warning>
-since [[https://github.com/volkszaehler/vzlogger/commit/5b65beaf81f029e71f17c6a3a48a2eb1a2167f8b|this commit]] dated Februar 5 2013 the master-branch contains the C++-version! to get the c-version, check out the "c-version" branch!
-</note>
-<code>
-cd vzlogger
-./configure && make && make install
-</code>
-if you are having trouble building with libsml:
-(read this for more details:
-[[http://volkszaehler.org/pipermail/volkszaehler-users/2012-September/000487.html]])
-<code>
-./configure DEPS_SML_CFLAGS=-I/path/to/libsml/sml/include/ DEPS_SML_LIBS='/path/to/libsml/sml/lib/libsml.a -luuid'
-</code>
-==== systemd start script====
-If your computer uses systemd then follow these steps to add vzlogger as a new service:
-Create a file vzlogger.service in /usr/lib/systemd/system/ and fill it with these lines
-<code>
-[Unit]
-Description=vzlogger
-After=syslog.target network.target
-[Service]
-ExecStart=/usr/local/bin/vzlogger -f /etc/vzlogger.conf
-ExecReload=/bin/kill -HUP $MAINPID
-StandardOutput=null
-[Install]
-WantedBy=multi-user.target
-</code>
-<note important>
-Please take care that both paths to the binary (vzlogger) and its configuration file (vzlogger.conf) are correct.
-</note>
-You can start, stop or verify vzloggers status using the common systemctl command:
-<code>
-~]# systemctl start vzlogger
-~]# systemctl status vzlogger
-~]# systemctl stop vzlogger
-</code>
-If you are satisfied and want to have vzlogger permanently startet as a service everytime your machine boots, just enable it:
-<code>
-~]# systemctl enable vzlogger
-</code>