Benutzer-Werkzeuge

Webseiten-Werkzeuge


hardware:controllers:raspberry_pi_erweiterung_rev1

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen RevisionVorhergehende Überarbeitung
Nächste Überarbeitung
Vorhergehende Überarbeitung
hardware:controllers:raspberry_pi_erweiterung_rev1 [2015/09/29 10:25] – [Bestückungsplan und Anschlussplan] udo1hardware:controllers:raspberry_pi_erweiterung_rev1 [2017/10/20 08:42] (aktuell) – Aktuelle Erweiterung verlinkt jau
Zeile 1: Zeile 1:
 ======RaspberryPi-Erweiterung_Rev.1====== ======RaspberryPi-Erweiterung_Rev.1======
  
-<note important>Da die [[hardware:controllers:raspberry_pi_erweiterung_mit_schaltausgaengen|Raspberry Pi-Erweiterung mit Schaltausgängen]] die gleichen Funktionen hat unterstütze ich diese Version nicht mehr.\\ Udo</note>+<note important>Diese Erweiterung wird nicht mehr unterstützt. 
 + 
 +Empfohlene Alternative:  
 + [[/hardware:controllers:raspberry_pi_erweiterung_mit_schaltausgaengen_rev.1|RaspberryPi-Erweiterung mit Schaltausgängen Rev.1]]</note>
  
  
Zeile 51: Zeile 54:
 //#T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100//\\ //#T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100//\\
 Save the file.\\ Save the file.\\
 +\\
 **Disable Bootup Info:**\\ **Disable Bootup Info:**\\
 Disable it by editing the file /boot/cmdline.txt .\\ Disable it by editing the file /boot/cmdline.txt .\\
Zeile 58: Zeile 62:
 //dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait//\\ //dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait//\\
 Save the file.\\ Save the file.\\
 +\\
 +**Alle drei Busmaster aktivieren:**\\
 +rc.local bearbeiten:\\
 +echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-1/new_device\\
 +echo ds2482 0x19 > /sys/bus/i2c/devices/i2c-1/new_device\\
 +echo ds2482 0x1a > /sys/bus/i2c/devices/i2c-1/new_device\\
 +Save the file.\\
 +\\
 +Ob alle drei Busmaster aktiv sind kann man mit:\\
 +ls /sys/bus/w1/devices/\\
 +überprüfen.\\
 +\\
 **Reboot**\\ **Reboot**\\
 In order you enable the changes you have made, you will need to reboot the Raspberry Pi:\\ In order you enable the changes you have made, you will need to reboot the Raspberry Pi:\\
hardware/controllers/raspberry_pi_erweiterung_rev1.1443515152.txt.gz · Zuletzt geändert: 2015/09/29 10:25 von udo1