use raspi-config to:
update the system:
apt-get update apt-get upgrade reboot
apt-get install git cmake g++ libsqlite3-dev (this will pull cmake-data emacsen-common git-man libcurl3-gnutls liberror-perl libxmlrpc-core-c3 rsync)
apt-get install libboost1.49-dev libboost-chrono1.49-dev libboost-chrono1.49.0 libboost-date-time1.49-dev libboost-date-time1.49.0 libboost-filesystem1.49-dev libboost-filesystem1.49.0 libboost-system1.49.0 libboost-system1.49-dev libboost-program-options1.49-dev libboost-program-options1.49.0 libboost-serialization1.49.0 libboost-serialization1.49-dev libboost-test1.49-dev libboost-test1.49.0 libboost-thread-dev libboost-thread1.49-dev libboost-thread1.49.0
compiling hexabus on a RaspberryPi is actually possible. During the process you do need a considerable amount of RAM - virtual memory is ok. As our beloved RPi only comes along with 256 / 512 MB and you need to provide enough RAM for the peak of some 1000 MB, you should have 1 GB of swap space available. You can do so by simply inserting a usb memory stick into the RPi, create a swap partition, format and activate it:
cfdisk /dev/<your device name here> #remark: make sure you have the correct one here! delete the existing partition (...you are going to loose all data on the stick in this step...) create a new partition with at least 1 GB of space set the partition type to "82" write the results to the stick and quit cfdisk mkswap /dev/<your device name here> (e.g.: "mkswap /dev/sda1")
cd /usr/local/src git clone https://github.com/mysmartgrid/libklio.git cd libklio make release *) dpkg -i build/libklio-0.2.0-linux.deb cd .. *) make release throws an error at the end because it's unable to find rpmbuild (well...): [...] CPack: - package: /usr/local/src/libklio/build/libklio-0.2.0-Linux.deb generated. CPack: Create package using RPM CPack: Install projects CPack: - Run preinstall target for: libklio CPack: - Install project: libklio CPack: Create package CMake Error at /usr/share/cmake-2.8/Modules/CPackRPM.cmake:271 (MESSAGE): RPM package requires rpmbuild executable CPack Error: Error while execution CPackRPM.cmake CPack Error: Cannot find rpmbuild CPack Error: Problem compressing the directory CPack Error: Error when generating package: libklio make[1]: *** [package] Error 1 make: *** [release] Error 2
git clone https://github.com/mysmartgrid/hexabus.git cd hexabus git checkout development cd hostsoftware/libhexabus make release #remark: took some 20 minutes to complete dpkg -i build/libhexabus-0.6.0-Linux.deb cd ..
cd hba make release #remark: took some 100 minutes to complete cd ..
cd hbc make release #remark: took some 440 minutes to complete - be patient! dpkg -i build/ cd ..
cd hexinfo make release #remark: took some 380 minutes to complete - almost there! dpkg -i build/ cd ..
apt-get install libboost-system1.49.0 libboost-program-options1.49.0 libboost-filesystem1.49.0 libboost-thread1.49.0